# Unable to print in A3

**URL:** <https://forums.toadworld.com/t/unable-to-print-in-a3/2468>\
**Category:** Toad Data Modeler\
**Created:** [February 24, 2011, 1:08pm UTC](https://forums.toadworld.com/t/unable-to-print-in-a3/2468 "2011-02-24T13:08:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DanCJ](https://sea1.discourse-cdn.com/quest/user_avatar/forums.toadworld.com/dancj/32/55_2.png) [@DanCJ](https://forums.toadworld.com/u/DanCJ)\
**Post date:** [February 24, 2011, 1:08pm UTC](https://forums.toadworld.com/t/unable-to-print-in-a3/2468/1 "2011-02-24T13:08:43Z")

</div>

Hi

I have created a large landscape diagram which I am trying to print in A3.

I have selected A3, Landscape and Fit to Page on the Page Format dialogue box, and it previews perfectly. When I try to print it however I get a single page of A4 showing the top left section of the diagram.

I have also tried printing to the Microsoft XPS Document Writer, but that refuses to produce a landscape page. any attempt gives me a portrait page with some of the diagram hanging off the edge.

The only thing I have managed so far is to a PNG file and print that, but that loses a lot of quality.

Any help would be appreciated.

Dan

---

<div class="post-metadata">

**Author:** ![Vaclav\_Frolik](https://sea1.discourse-cdn.com/quest/user_avatar/forums.toadworld.com/vaclav_frolik/32/12_2.png) [@Vaclav\_Frolik](https://forums.toadworld.com/u/Vaclav_Frolik)\
**Post date:** [March 2, 2011, 8:22am UTC](https://forums.toadworld.com/t/unable-to-print-in-a3/2468/2 "2011-03-02T08:22:46Z")

</div>

Hi,

I apologize for dealyed response. Please try to select printer and format on Page Format dialog. Click File | Page format and select a printer at bottom of the dialog. Then specify Page fomat in the first combo box.

If it does’t help, please send us your model to [modeling@quest.com](mailto:modeling@quest.com) and we will look into the matter.

Thank you,

Vaclav

---

<div class="post-metadata">

**Author:** ![DanCJ](https://sea1.discourse-cdn.com/quest/user_avatar/forums.toadworld.com/dancj/32/55_2.png) [@DanCJ](https://forums.toadworld.com/u/DanCJ)\
**Post date:** [March 2, 2011, 9:22am UTC](https://forums.toadworld.com/t/unable-to-print-in-a3/2468/3 "2011-03-02T09:22:05Z")

</div>

Thanks - but that was what I’d already tried.

Don’t worry about it though. I was evaluating the product to see if it was for us and we wound up going for a different one.
