Used to narrow the result set once I started typing. Now, as soon as I type the 1st letter the pick-list window goes blank. A choice will appear once I finish typing in a full name.
Michael, I had mentioned having an option to eliminate synonyms that start with slash (/) - is that a possibility? I’m still experiencing slowness with the pick-list (I have public synonyms selected), so so was hoping that might help speed it up as well as de-clutter the list.
Please provide an example for the first issue. Peter sent me an offline email where aliases are no longer functional. Is this your case as well?
I see the SB also has this option. I've logged a issue here to add it to Code Insight as well.
On 01/22/2014 11:44 AM, droeschley_109 wrote:
Thread created by droeschley_109
Used to narrow the result set once I started typing. Now, as soon as I type the 1st letter the pick-list window goes blank. A choice will appear once I finish typing in a full name.
Michael, I had mentioned having an option to eliminate synonyms that start with slash (/) - is that a possibility? I'm still experiencing slowness with the pick-list (I have public synonyms selected), so so was hoping that might help speed it up as well
as de-clutter the list.
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
Type the following:
SELECT * FROM dba_repkey_columns drc
WHERE drc.
wait for pick-list to appear (or type ctrl-T) - will contain 3 columns. Type “o”
pick-list window goes blank
Type “oname” and ONAME appears in pick-list.
Another problem:
type:
SELECT * FROM sys.dba_repkey_columns drc
WHERE drc.
when table is prefixed with schema name, pick-list window is blank. Type “o” and 3 columns appear but 1st one (COL) is highlighted - s/b ONAME
Ok, I think this is the same issue. I have it on my todo list for today.
On 01/22/2014 12:28 PM, droeschley_109 wrote:
Reply by droeschley_109
Type the following:
SELECT * FROM dba_repkey_columns drc
WHERE drc.
wait for pick-list to appear (or type ctrl-T) - will contain 3 columns. Type "o"
pick-list window goes blank
Type "oname" and ONAME appears in pick-list.
Another problem:
type:
SELECT * FROM sys.dba_repkey_columns drc
WHERE drc.
when table is prefixed with schema name, pick-list window is blank. Type "o" and 3 columns appear but 1st one (COL) is highlighted - s/b ONAME
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
option to eliminate synonyms that start with slash (/)
In for next beta. Added as a child node to the Editor|Code Assist|Toad Insight Objects tree to exclude these. Default is checked.
On 01/22/2014 11:44 AM, droeschley_109 wrote:
Thread created by droeschley_109
Used to narrow the result set once I started typing. Now, as soon as I type the 1st letter the pick-list window goes blank. A choice will appear once I finish typing in a full name.
Michael, I had mentioned having an option to eliminate synonyms that start with slash (/) - is that a possibility? I'm still experiencing slowness with the pick-list (I have public synonyms selected), so so was hoping that might help speed it up as well
as de-clutter the list.
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
This should be fixed in next beta.
Michael
On 01/22/2014 12:28 PM, droeschley_109 wrote:
Reply by droeschley_109
Type the following:
SELECT * FROM dba_repkey_columns drc
WHERE drc.
wait for pick-list to appear (or type ctrl-T) - will contain 3 columns. Type "o"
pick-list window goes blank
Type "oname" and ONAME appears in pick-list.
Another problem:
type:
SELECT * FROM sys.dba_repkey_columns drc
WHERE drc.
when table is prefixed with schema name, pick-list window is blank. Type "o" and 3 columns appear but 1st one (COL) is highlighted - s/b ONAME
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
in .19 I still have the problem that when I start typing a column name, the pick-list window goes blank. Also, if I select a column from the pick-list, the table alias is still being capitalized.
Ok, I see the blank list with your previous example still. Will investigate.
Regarding the table alias. It's obeying the option to use lower case object names on the Editor|Behavior options page. Do you have that unchecked? It looks like 12.1 is also obeying that option. Are you seeing differently?
On 02/05/2014 01:11 PM, droeschley_109 wrote:
Reply by droeschley_109
in .19 I still have the problem that when I start typing a column name, the pick-list window goes blank. Also, if I select a column from the pick-list, the table alias is still being capitalized.
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3684/7045 - Release Date: 01/30/14
I have the option checked. Just tested in 12.1 and it is not capitalizing the alias.
Gotch. I had it unchecked. I'll look this afternoon.
On 02/05/2014 01:28 PM, droeschley_109 wrote:
Reply by droeschley_109
I have the option checked. Just tested in 12.1 and it is not capitalizing the alias.
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3684/7045 - Release Date: 01/30/14
Ok, I think these two issues are now behind us for next beta.
Michael
On 02/05/2014 01:28 PM, droeschley_109 wrote:
Reply by droeschley_109
I have the option checked. Just tested in 12.1 and it is not capitalizing the alias.
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3684/7045 - Release Date: 01/30/14
Capitalization of alias is fixed - thanks.
Blank pick-list partially -
I have a column named ALLOW_AUTHENTICATION_FLAG
When I type “al”, pick-list displays column, if I type “all”, pick-list window goes blank, if I type “allo” pick-list displays column.
A separate problem:
UPDATE table1 t1
set t1. <–No pick-list column list displays.
SELECT * FROM table1 t1. <–Pick-list displays fine.
SELECT *
FROM dba_tab_partitions dta
WHERE dta. <-- pick-list displays just fine.
BEGIN
FOR tab_part IN (SELECT *
FROM dba_tab_partitions dta
WHERE dta. <-- no pick-list display
I can reproduce the ALLOW_AUTHENTICATION_FLAG issue and after some time investigating I finally noticed that the parser DLL in this drop seems wrong. The version information is wrong, copyright is way off, and the parser data is very different from that seen
when using the parser's test tool. I'm going to revisit this once we get the right parser binaries in there as I think that is the cause of the first issue. I'll test the other issues with the new parser as well.
On 02/10/2014 03:57 PM, droeschley_109 wrote:
Reply by droeschley_109
Capitalization of alias is fixed - thanks.
Blank pick-list partially -
I have a column named ALLOW_AUTHENTICATION_FLAG
When I type "al", pick-list displays column, if I type "all", pick-list window goes blank, if I type "allo" pick-list displays column.
A separate problem:
UPDATE table1 t1
set t1. <--No pick-list column list displays.
SELECT * FROM table1 t1. <--Pick-list displays fine.
SELECT *
FROM dba_tab_partitions dta
WHERE dta. <-- pick-list displays just fine.
BEGIN
FOR tab_part IN (SELECT *
FROM dba_tab_partitions dta
WHERE dta. <-- no pick-list display
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3684/7045 - Release Date: 01/30/14
Internal Virus Database is out of date.
These items are fixed for next beta.
Michael
From: droeschley_109 [mailto:bounce-droeschley_109@toadworld.com]
Sent: Monday, February 10, 2014 3:57 PM
To: toadoraclebeta@toadworld.com
Subject: RE: [Toad for Oracle - Beta Discussion Forum] pick-list window goes blank once I start typing
RE: pick-list window goes blank once I start typing
Reply by droeschley_109
Capitalization of alias is fixed - thanks.
Blank pick-list partially -
I have a column named ALLOW_AUTHENTICATION_FLAG
When I type “al”, pick-list displays column, if I type “all”, pick-list window goes blank, if I type “allo” pick-list displays column.
A separate problem:
UPDATE table1 t1
set t1. <–No pick-list column list displays.
SELECT * FROM table1 t1. <–Pick-list displays fine.
SELECT *
FROM dba_tab_partitions dta
WHERE dta. <-- pick-list displays just fine.
BEGIN
FOR tab_part IN (SELECT *
FROM dba_tab_partitions dta
WHERE dta. <-- no pick-list display
To reply, please reply-all to this email.
Stop receiving emails on this subject.
Or
Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum
Flag
this post as spam/abuse.
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3684/7045 - Release Date: 01/30/14
Internal Virus Database is out of date.