Toad World® Forums

New Editor and Large files

The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package and find that I can type about three or four characters before TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis


Phyllis Helton

Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org

3100 lines isn’t big especially compared to my test cases. I suspect you’re right about CI or some other feature that listens to keystrokes. I’ll look after the holidays. All offices are closed this week and some of us are out next week too.

On Dec 23, 2014, at 3:21 PM, phyllis.helton_1150 bounce-phyllishelton_1150@toadworld.com wrote:

New Editor and Large files

Thread created by phyllis.helton_1150
The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package and find that I can type about three or four characters before
TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis


Phyllis Helton

Data Magician

Digital Strategies, Cru |
Data Sciences & Analytics

Office :phone: 407-515-4452
phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or
Unsubscribe from Toad for Oracle - Beta
notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag
this post as spam/abuse.

Glad you guys get the holidays off. :slight_smile: I’m just reporting stuff as I find it so I don’t forget.

On Tue, Dec 23, 2014 at 3:27 PM, Michael Staszewski bounce-mstaszew@toadworld.com wrote:

Re: New Editor and Large files

Reply by Michael Staszewski
3100 lines isn’t big especially compared to my test cases. I suspect you’re right about CI or some other feature that listens to keystrokes. I’ll look after the holidays. All offices are closed this week and some of us are out next week too.

On Dec 23, 2014, at 3:21 PM, phyllis.helton_1150 bounce-phyllishelton_1150@toadworld.com wrote:

New Editor and Large files

Thread created by phyllis.helton_1150
The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package and find that I can type about three or four characters before TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis


Phyllis Helton
Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452
phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.
Or Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or Unsubscribe from Toad for Oracle - Beta notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.


Phyllis Helton

Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org

Hey Phyllis,

“Data Magician”? What a brilliant job title!

Have a Happy Christmas or !

Cheers,

Norm [ TeamT ]

Sent from my Android device with K-9 Mail. Please excuse my brevity.

Yeah, I like it. It isn’t the one that shows up in the HR system, but it fits what I do much better. :slight_smile:

Hope you have a happy Christmas, too, Norm!

On Tue, Dec 23, 2014 at 5:55 PM, Norm [TeamT] bounce-NormTeamT@toadworld.com wrote:

Re: New Editor and Large files

Reply by Norm [TeamT]

Hey Phyllis,

“Data Magician”? What a brilliant job title!

Have a Happy Christmas or !

Cheers,
Norm [ TeamT ]

Sent from my Android device with K-9 Mail. Please excuse my brevity.

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or Unsubscribe from Toad for Oracle - Beta notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.


Phyllis Helton

Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org

Is this issue repeatable for you? Please send me your user files. michael.staszewskiquest.com

Thanks,
Michael

On 12/23/2014 03:21 PM, phyllis.helton_1150 wrote:

New Editor and Large files

Thread created by phyllis.helton_1150
The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package and find that I can type about three or four characters before TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis


Phyllis Helton
Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452
phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.
Or Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.

This seems to be working okay today, so maybe it was just the version of the beta I was using then.

On Mon, Jan 5, 2015 at 9:36 AM, Michael Staszewski bounce-mstaszew@toadworld.com wrote:

Re: New Editor and Large files

Reply by Michael Staszewski
Is this issue repeatable for you? Please send me your user files. michael.staszewski@quest.com

Thanks,
Michael

On 12/23/2014 03:21 PM, phyllis.helton_1150 wrote:

New Editor and Large files

Thread created by phyllis.helton_1150
The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package and find that I can type about three or four characters before TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis


Phyllis Helton
Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452
phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.
Or Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or Unsubscribe from Toad for Oracle - Beta notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.


Phyllis Helton

Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org

so maybe it was just the version of the beta I was using then

So which version of Toad are you using? This would really helped a lot in investigation.

Or we have to be magicians as well?

:slight_smile:

Something may have changed although nothing is ringing a bell. Do you use capitalization effects (are any styles on the Font and Styling options page set to uppercase
or lowercase)? If so that may have been the issue and it might just be coincidence that your work yesterday didn’t setup the conditions to produce it. That was a pretty bad bug and it’s fixed in the next beta.

Michael

From: phyllis.helton_1150 [mailto:bounce-phyllishelton_1150@toadworld.com]

Sent: Monday, January 05, 2015 3:29 PM

To: toadoraclebeta@toadworld.com

Subject: Re: [Toad for Oracle - Beta Discussion Forum] New Editor and Large files

Re: New Editor and Large files

Reply by phyllis.helton_1150

This seems to be working okay today, so maybe it was just the version of the beta I was using then.

On Mon, Jan 5, 2015 at 9:36 AM, Michael Staszewski bounce-mstaszew@toadworld.com wrote:

Re: New Editor and Large files

Reply by Michael Staszewski

Is this issue repeatable for you? Please send me your user files.
michael.staszewski@quest.com

Thanks,

Michael

On 12/23/2014 03:21 PM, phyllis.helton_1150 wrote:

New Editor and Large files

Thread created by phyllis.helton_1150

The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package
and find that I can type about three or four characters before TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis

Phyllis Helton

Data Magician

Digital Strategies, Cru | Data Sciences & Analytics

Office :phone: 407-515-4452

phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or
Unsubscribe from Toad for Oracle - Beta
notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag
this post as spam/abuse.

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or
Unsubscribe from Toad for Oracle - Beta
notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag
this post as spam/abuse.

Phyllis Helton

Data Magician

Digital Strategies, Cru | Data Sciences & Analytics

Office :phone: 407-515-4452

phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or
Unsubscribe from Toad for Oracle - Beta
notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag
this post as spam/abuse.

I don’t use anything special with the capitalization effects. Though I wonder if it was the same thing that got fixed with the Navigator where it was bringing me to the wrong procedure in that same file.

Personally, though I know you would like to know why it works now, I’m just glad it is fixed. :slight_smile:

On Tue, Jan 6, 2015 at 9:29 AM, Michael Staszewski bounce-mstaszew@toadworld.com wrote:

RE: New Editor and Large files

Reply by Michael Staszewski
Something may have changed although nothing is ringing a bell. Do you use capitalization effects (are any styles on the Font and Styling options page set to uppercase or lowercase)? If so that may have been the issue and it might just be coincidence that your work yesterday didn’t setup the conditions to produce it. That was a pretty bad bug and it’s fixed in the next beta.

Michael

From: phyllis.helton_1150 [mailto:bounce-phyllishelton_1150@toadworld.com]
Sent: Monday, January 05, 2015 3:29 PM
To: toadoraclebeta@toadworld.com
Subject: Re: [Toad for Oracle - Beta Discussion Forum] New Editor and Large files

Re: New Editor and Large files

Reply by phyllis.helton_1150

This seems to be working okay today, so maybe it was just the version of the beta I was using then.

On Mon, Jan 5, 2015 at 9:36 AM, Michael Staszewski bounce-mstaszew@toadworld.com wrote:

Re: New Editor and Large files

Reply by Michael Staszewski

Is this issue repeatable for you? Please send me your user files. michael.staszewski@quest.com

Thanks,
Michael

On 12/23/2014 03:21 PM, phyllis.helton_1150 wrote:

New Editor and Large files

Thread created by phyllis.helton_1150

The performance of the new editor when there is a large file loaded is atrocious. I have a file loaded that has 3100+ lines in it. I’m trying to add a new function to the package and find that I can type about three or four characters before TOAD locks up for several minutes. Then I can type a few more characters, rinse and repeat.

If I type my function in a different tab it works just fine, so I’m guessing the problem is related to the code insight or one of the other features I love about TOAD.

Have a wonderful Christmas!

Phyllis

Phyllis Helton
Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.
Or Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.

To reply, please reply-all to this email.

Stop receiving emails on this subject.
Or Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.

Phyllis Helton
Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org

To reply, please reply-all to this email.

Stop receiving emails on this subject.
Or Unsubscribe from Toad for Oracle - Beta notifications altogether.
Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.

To reply, please reply-all to this email.

Stop receiving emails on this subject.

Or Unsubscribe from Toad for Oracle - Beta notifications altogether.

Toad for Oracle - Beta Discussion Forum

Flag this post as spam/abuse.


Phyllis Helton

Data Magician
Digital Strategies, Cru | Data Sciences & Analytics
Office :phone: 407-515-4452

phyllis.helton@cru.org